AAC Products

AAC BLOCK – E0

Autoclaved Aerated Concrete Blocks with a density of 430 ± 30 kg/m3, compressive strength of minimum 3.2 N/mm2, and thermal conductivity of 0.110.12- W/mK.

AAC BLOCK – E1

Autoclaved Aerated Concrete Blocks with a density of 475 ± 20 kg/m3, compressive strength of minimum 3.2 N/mm2, and thermal conductivity of 0.13 W/mK.

AAC BLOCK – E2

Autoclaved Aerated Concrete Blocks with a density of 500 ± 20 kg/m3, compressive strength of minimum 3.2 N/mm2, and thermal conductivity of 0.135 W/mK.

AAC BLOCK – E3

Autoclaved Aerated Concrete Blocks with a density of 600 ± 20 kg/m3, compressive strength of minimum 3.2 N/mm2, and thermal conductivity of 0.14 W/mK.

U-BLOCK

U-block filled with C40 concrete are used in door openings. The screws/ hanger are drilled in U-blocks since it can carry more than 250 kg of load.

LINTELS

AAC Lintels is a horizontal reinforced member placed across the opening  (door/window) to carry the blocks above the windows/doors.

FLOOR PANELS

Structural Floor Panels are reinforced with steel. These are used as floor/roof slabs.

WALL PANELS

Non-Load Bearing Vertical Wall Panels are reinforced with steel and are used for internal partitions and separating walls. Our panels give a minimum 2 hour fire rating, tested at Thomas Bell-Wright labs and currently submitted to civil defense approval. Acoustic tests have also been conducting demonstrating that our wall panel systems meet the acoustic requirements set by municipalities.

HOURDI BLOCKS

These are commonly known as “filler blocks” that are used to create floors and roofs.These blocks rest on reinforced concrete called filigree slabs.

JUMBO BLOCKS

Large-sized Blocks are 1000 mm length x 500 mm height x 600 mm thick (dimensions may vary depending upon client requirement) used for walling purposes.

AAC BLOCK MORTAR

Through our sister company Exeed Premium Dry Mortar, we can provide you a complete AAC system including our superior quality AAC block mortar & plastering materials.